日本語
English
简体中文
繁體中文
한국어
ไทย
Tiếng Việt
Indonesia
Français
Español
Português
*Submission deadline: 3pm on weekdays *Excluding weekends and holidays
Company emblem design sample
There are some designs such as thin lines that cannot be reproduced when used as a company emblem.
Please prepare your design and contact the store.
Price and size of lapel badge
The size is within 16 x 16 mm.
A separate estimate will be required for sizes over 16 x 16 mm.
Please specify the color using DIC color.
Metal colors (gold and silver) are not included in the number of colors.
Price is for up to 2 colors.
For 3 or more colors, a separate quote will be required.
Processing type of company emblem
You can choose from 3 types of surface treatment and 2 types of back parts.
Type of surface treatment
Please choose from 3 types.
①Press uneven polishing finish
Sharply expressed using only the shading of the uneven metal!
Gold color + unevenness (glossy finish)
Silver color + unevenness (glossy finish)
Gold + uneven (grained finish)
Silver color + unevenness (grain finish)
The concave part can also be honed (matte).
There are coarse and fine grains of sand.
② Damshin style finish
The concave parts of the metal are colored black to make the convex plating stand out!
Golden + Damshin
Silver + Damshin
③Pseudo cloisonné finish
Color the concave parts of the metal with pigment to express the design in a cloisonné style!
■I want to make the letters shine!
gold + 1 color
Silver + 1 color
gold + 1 color
Silver + 1 color
Silver + 2 colors
There are some designs, such as fine lines, that cannot be expressed as company emblems.
In the case of pseudo-cloisonné, the dye is poured in, so there is a "edge".
Type of back parts
You can choose from 2 types.
screw
tie tack
Points of company emblem design
Comparison of actual photos and design data for each processing type.
Please refer to this when considering the design.
A/B) Pseudo cloisonne 1 color
C/D) Pseudo cloisonne 2 colors
E/F) Press/Grain
G/H) Damshin
Right-angled parts of the contour are chamfered, and there are no acute angles.
If you want to incorporate "bag letters" with a frame around the letters into your design,
Due to the nature of the company emblem, thin lines and complicated designs cannot be used.
bag character design
It is mandatory to create a metal edge line for injecting the dyeing pigment.
It may not be possible to color ``thin'' or ``complex'' designs where the border lines cannot be removed.
*Cursive, Ming, semi-cursive, decorative, etc. are possible.
