sheet creation

inkjet sheet

Inkjet sheets are available in three types: ① opaque, ② semi-milky, and ③ transparent.
※②Milk-semi-transparent and ③Transparent are mainly used for decorative illumination.

① Inkjet sheet (opaque)

This is a sheet made of vinyl chloride and compatible with inkjet output that can be attached to plate signs, etc. It has high color development and reproducibility, and can also be used to output images such as photographs.
It can be used for plate signboards such as aluminum composite boards used outdoors, and can be applied directly to windows etc. for advertising graphics.

② Inkjet sheet (milk and half)

This is a half-sized vinyl chloride sheet that is attached to the drawing board of internally illuminated signboards. Color development and reproducibility are slightly lower than with opaque sheets.
It can be used as a drawing board for various internally illuminated signboards used outdoors, or directly attached to windows for decoration and advertising graphics.

③Inkjet sheet (transparent)

This is a transparent vinyl chloride sheet that is attached to the drawing board (half half) of internally illuminated signboards. Color development and reproducibility are slightly lower than with opaque sheets.
It can be applied directly to outdoor plate signs, windows, etc. and used for advertising graphics.
*Please note that since the sheet is transparent, the appearance of the color will change depending on the substrate on which it is applied.

The surface of the inkjet sheet can be glossy (glossy) or non-glossy (matte).

Length: 600mm x Width: 300mm For 1 sheet = 5,940 yen *Creation fee is not included
Height: 600mm x Width: 300mm For 2 sheets = 7,920 yen *Creation fee is not included
*In the case of 2 sheets, the total area is the same as 600mm x 600mm, so it will be cheaper.

Cutting sheet

A cutting sheet is a PVC film sheet with adhesive. There are various types, and you can choose one according to the purpose. However, photographs and images cannot be reproduced.
It is widely used for cut letters on signboards, markings on cars and motorcycles, stickers on aircraft, etc., and is extremely durable. It is mainly used as cut letters pasted on plates and windows.

The price is for up to 20 characters. From 21 characters onwards, the following charges will apply.
1 character from 21 characters + 220 yen ~
The price of the cutting sheet is calculated per color.

• Block creation (data creation): 5,500 yen ~
• Black and white ㎡ unit price 10,450 yen x area
  If the area is 0.506㎡ or less, the minimum black and white output price is 5,390 yen
• Color ㎡ unit price 15,620 yen x area
  If the area is 0.669㎡ or less, the minimum color output price is 10,450 yen.

Length: 400mm x Width: 900mm For 2 sheets
(Number of characters: 22 characters)
0.4m long x 0.9m wide x 2 sheets = 0.72㎡
Black and white square meter unit price: 10,450 yen x 0.72 square meter = 7,524 yen Total number of characters: 22 characters (2 additional characters) = 220 yen x 2
= 440 yen + shipping fee 2,200 yen = 10,164 yen *Creation fee is not included

This design is treated as 11 characters, and there will be an additional charge for 2 characters in total for 2 sheets.

tarpaulin

A vinyl material made of polyester fiber sandwiched between soft synthetic resin films. This fabric was originally used for sails on yachts, and has a slightly uneven surface.
Tarpaulin is a fabric that does not allow light to pass through, and is mainly used as a sheet for making banners, tapestries, and tent signs.

You can choose between eyelet specifications or upper and lower bag processing specifications. The upper and lower bag processing is an installation method in which poles are passed through the upper and lower sides. Pole will be quoted separately. Due to the printing process, it may shrink by around 10 mm. Thank you for your understanding.

• Block creation (data creation) 5,500 yen ~
• For 1㎡ or more: Unit price 12,980 yen x area
• If less than 1㎡ Unit price 15,620 yen x area
  If the area is 0.169㎡ or less, the minimum output price is 3,740 yen.
• String 1m unit price 440 yen x length

Length: 2350mm x Width: 1350mm
Total length of string: 1.5m In the case of 1 piece: 2.35m long x 1.35m wide x 1 piece = 3.1725㎡
1㎡ or more unit price 12,980 yen x 3.1725㎡
+ 1.5 m of string 660 yen = 41,839 yen + shipping fee 2,750 yen = 44,589 yen *Creation fee is not included

wallpaper sheet

This is an adhesive sheet type wallpaper with a texture similar to indoor wall cloth. Inkjet printing is possible, and the texture of the surface can be expressed with unevenness.
It can support the spatial presentation of shops and sales floors, giving walls a three-dimensional, graphic finish. It is possible to express not only solid colors but also photographs and images.

*Wallpaper sheets are available in matte only.

• Block creation (data creation): 5,500 yen ~
• Output m2 unit price 15,620 yen x area
  If the area is 0.169㎡ or less, the minimum output price is 3,740 yen.

Length: 100mm x Width: 100mm For 1 piece Height: 0.1m x Width: 0.1m x 1 piece = 0.01㎡
Since the total area is less than 0.24㎡, the minimum output price is 3,740 yen + shipping fee 2,200 yen
= 5,940 yen *Creation fee is not included