Orca grouper "stamp stand"

Reliable Shachihata stamp pad that is easier to use in business

stamp_pad_main.jpg

stamp_pad_img01.jpg

Approximately 8,500 times of summer stamps!

It is very economical as it allows you to make many beautiful impressions, and it lasts a long time before being refilled.
*Number of medium (black) summer stamps.
*Using a 60 x 20 mm rubber stamp.

Drying time: about 3 seconds!

It dries quickly, so you can rest assured that you can stack documents immediately after marking them.
*Natsu stamp on PPC paper (copy paper).

Environmentally Friendly!

This is an environmentally friendly product that uses recycled materials for its main body.
stamp_pad_green.png

Print with deep colors and clearly!

Even with light pressure, you can leave an even and uniform impression, so you can rest assured when marking important documents.
Stamp sample using rubber stamp
stamp_pad_inei.png

Speedy ink refill!

The highly absorbent surface fabric allows ink to penetrate quickly, allowing for smooth ink refilling.
Stamp ink for stamp pads
stamp_pad_ink.jpg
Small bottle 880 yen Large bottle 2,090 yen

Vibrant ink color variations!

There are six colors: black, red, indigo, green, vermilion, and purple.
You can choose the color that suits your application from a wide variety of ink colors.

stamp_pad_lineup01.jpg
black
stamp_pad_lineup02.jpg
red
stamp_pad_lineup03.jpg
Indigo
stamp_pad_lineup04.jpg
green
stamp_pad_lineup05.jpg
vermilion
stamp_pad_lineup06.jpg
purple

Shachihata stamp pad board size

There are four board sizes: small, medium, large, and extra large.

stamp_pad_size01.jpg
small size
63×40mm
880 yen
stamp_pad_size02.jpg
Medium size
90×56mm
1,100 yen
stamp_pad_size03.jpg
large size
106×67mm
1,210 yen
stamp_pad_size04.jpg
extra large size
143×87mm
2,970 yen


The design, specifications, appearance, color, price, etc. of this product are subject to change without notice.
Please note that the color of the product photos may differ from the actual product.

*Price includes tax.

Stamp pad ink refill

  1. Shake the refill ink well with the cap on.
  2. Remove the cap of the refill ink and apply it evenly little by little while pressing the nozzle lightly against the surface of the stamp pad.
  3. Please be sure to test the product after the ink has completely penetrated.
  4. Wipe off any excess ink adhering to the nozzle with tissue paper, etc., then close the refill ink cap.

*Be sure to make a trial stamp when making a date stamp for the first time after refilling ink.

Note : If you get ink on your hands, wash it off with soap as soon as possible.
・If ink gets on your clothes, it will be difficult to remove, so please be careful.

Shop Search